This article shows the differences and the use of the "t" and "tt" Custom Format Specifiers in LightSwitch Visual Studio 2012."t" Custom Format SpecifierThe "t" Custom Format Specifier represents the first character of the AM/PM designator. This designator is fetched from the DateTimeFormatInfo.AMDesignator or DateTimeFormatInfo.AMDesignator Property. Note: If the "t" format specifier is used without any custom format specifier then the "t" format specifier is considered to be a "Standard Date and Time Format Specifier"."tt" Custom Format SpecifierThe "tt" Custom Format Specifier represents the entire AM/PM designator. This name of week is fetched from the DateTimeFormatInfo.DayNames Property. For both, the format Specifier AM designator specifies an entire time duration from 0:00:00 (midnight) to 11:59:59:999 and the PM designator is used for an entire time duration from 12:00:00 (noon) to 23:59:59:999.Use the following procedure to create a sample showing how to use the "t" and "tt" Custom Format Specifiers on a Screen.Step 1Open the LightSwitch Application in Visual Studio 2012 and go to the Solution Explorer.Right-click on "Data Sources" and choose "Add Table".The table appears in the Table Designer window. Insert the records in the following table.Step 2Now once again go to the Solution Explorer, right-click on "Screens" and choose "Add Screen".The Add New Screen dialog box appears. Select the "Editable Grid Screen" from the Screen Template, inside screen information, choose "Employee" under screen data and provide some name to the Screen and click the "OK" button.The Screen Designer appears as shown below.Press F5 to run the application. Provide the information; we will get the following output. Step 3Now stop debugging the application. From the Table Designer select the "DOB" record as shown in the figure below.Then go to the Format Pattern of Property window in the Table Designer and enter "t" in the format pattern property as shown below. Here the "t" format specifier is considered to be a "Standard Date and Time Format Specifier". Hence it represents a short time pattern.Once again press F5 to run the application. This time we will get the following output.Step 4Once again stop debugging the application and select the "DOB" record from the table.Now go to the Format Pattern of the Property window in the Table Designer and this time enter "t dd" in the format pattern property as shown below.Once again press F5 to run the application. This time we will get the following output. Now we get the first character of the AM/PM designator.Step 5Once again stop debugging the application and go to the Format Pattern of Property window in the Table Designer and this time enter "tt" in the format pattern property as shown below.Once again press F5 in order to run the application. This time we will get the following output. Now this time we get an entire AM/PM designator.
You need to be a premium member to use this feature. To access it, you'll have to upgrade your membership.
Become a sharper developer and jumpstart your career.
$0
$
. 00
monthly
For Basic members:
$20
For Premium members:
$45
For Elite members: