String Class: Important Member Functions using C#


This article has been excerpted from book "The Complete Visual C# Programmer's Guide" from the Authors of C# Corner.

Here are some System.String class member functions: 

The ToUpper function converts a string to uppercase.: String.ToUpper(). 

The ToLower function converts a string to lowercase: String.ToLower(). 

The Concat function concatenates strings together:

  • String.Concat(String[]) concatenates the string array
  • String.Concat(String, String) concatenates the two strings
  • String.Concat(String, String, String) concatenates the three strings
  • String.Concat(String, String, String, String) concatenates the four strings

Listing 20.23 below shows an example of the String.Concat overloaded methods. 

Listing 20.23: Writing concatenated strings to the console 

             Console.Write("Enter the string array length : ");
            string strArr = Console.ReadLine();
            int intArr = int.Parse(strArr);

            for (int i = 0; i < intArr; i++)
            {                
                Console.Write("Enter string " + i + " : ");
                strTempArr[i] = Console.ReadLine();
                Console.WriteLine("The Concatenated string : " + String.Concat(strTempArr));
                Console.WriteLine("the concatenation of the first two string : " +
                String.Concat(strTempArr[0], strTempArr[1]));
                Console.WriteLine("the concatenation of the first three string : " +
                String.Concat(strTempArr[0], strTempArr[1], strTempArr[2]));
                Console.WriteLine("the concatenation of the first four string : " +
                String.Concat(strTempArr[0], strTempArr[1], strTempArr[2], strTempArr[3]));
            }

In Listing 20.24 the Copy function returns a new string with the same value as the string entered by the user. 

Listing 20.24: String.Copy 

            Console.WriteLine("original string : " + objString);
            Console.Write("enter the string to replace the above one : ");
            string strCopy = Console.ReadLine();
            objString = String.Copy(strCopy);
            Console.WriteLine("the string after copying : " + objString);

In Listing 20.25 the CopyTo function copies a part of one string to another string. 

Listing 20.25: String.CopyTo 

            Console.Write("Enter the source string : ");
            string strTmp = Console.ReadLine();
            Console.Write("Enter the starting index for source string : ");
            string strSrcSt = Console.ReadLine();
            int intSrcSt = int.Parse(strSrcSt);
            Console.Write("Enter the starting index in the destination string:");
            string strDstSt = Console.ReadLine();
            int intDstSt = int.Parse(strDstSt);
            Console.Write("Enter the number of characters to be copied from the source string : ");
            string strSrcLn = Console.ReadLine();
            int intSrcLn = int.Parse(strSrcLn);
            chArray = objStringToCharArray();
            strTmp.CopyTo(intSrcSt, chArray, intDstSt, intSrcLn);
            objString = new String(chArray);
            Console.WriteLine("The changed string is : " + objString);

In Listing 20.26 the EndsWith function returns a Boolean value, checking whether the parent string ends with the value entered by the user. 

Listing 20.26: String.EndsWith 

            Console.WriteLine("The string to be checked :" + objString);
            Console.Write("Enter the 'ends with' string :");
            String strTmp = Console.ReadLine();

            if (objString.EndsWith(strTmp))
                Console.WriteLine("'" + objString + "' ends with '" + strTmp + "'.");
            else
                Console.WriteLine("'" + objString + "' does not end with '" + strTmp + "'.");

The Format static function helps in formating strings containing numbers, dates, strings, and much more. Using the Format method you can pass in objects of different types and have them neatly inserted into your string. You can also handle column alignment and column width in the string. Below are some of the rules of using the overloaded static Format method.

  • Format(String str, Object obj) formats the string with one object.
  • Format(String str, Object obj1, Object obj2) formats the string with two objects.
  • The string should follow the formating specification: {N,[M]:[formatstring]}. N indicates the argument to be replaced and starts from zero(0). M indicates the length of formatting area, padded with spaces if the value filled in is smaller. Formatstring represents the value of the formating code.

Refer to C#.NET help for a full list of format strings. In Listing 20.27, the C format parameter is used for currency. If the value before the colon is negative, it is left justified to fit the number of characters of the value; if the value is positive, it is right justified. 

Listing 20.27: String.Format

            String strTmp = "{0} is working in {1,10} to earn {2,5:C} per month.\n{0} then works again in {1,-10} to earn the {2,-5:C} in cash";
            Console.WriteLine("The source string is : " + strTmp);
            Console.Write("Enter the first replacement string (a name) : ");
            String strTmp1 = Console.ReadLine();
            Console.Write("Enter the second replacement string (a place) : ");
            String strTmp2 = Console.ReadLine();
            Console.Write("Enter a numeral : ");
            String strTmp3 = Console.ReadLine();

            int intTmp = int.Parse(strTmp3);
            Console.WriteLine("the modified string :" + String.Format(strTmp, strTmp1, strTmp2, intTmp));

Figure20.1.gif

Figure 20.1: Output of Formatted String 

The GetHashCode function returns the hash code(a 32-bit signed integer value) for the string: 

            Console.WriteLine("Hash of '" + objString + "' is : " + objString.GetHashCode());

If you want to insert a string into the middle of another string, you can use the Insert method. The Insert method is illustrated in Listing 20.28 by having the user enter a string to be inserted into an existing string at a chosen position. 

Listing 20.28: String.Insert 

            Console.WriteLine("the original string : " + objString);
            Console.Write("Enter the string to be inserted : ");
            string strTmp = Console.ReadLine();
            Console.Write("Enter the position where it has to be inserted :");
            int intTmp = int.Parse(Console.ReadLine());
            objString = objString.Insert(intTmp, strTmp);
            Console.WriteLine("the modified string : " + objString);

The Join function joins two strings and string arrays into one body:

  • String.Join(string str, string[] strarr) joins the string arrays using str.
  • String.Join(string str, string[] strarr, int i, int j) joins the string arrays using str, starting from the ith array element and continuing j number of elements after it.

The StartsWith method is similar to the EndsWith method, except it verifies that a substring exists at the beginning of the parent string. As shown in Listing 20.29, the StartsWith function returns a Boolean value indicating whether the string starts with a string entered by the user. 

Listing 20.29: String.StartsWith 

            Console.WriteLine("The original string : " + objString);
            Console.Write("Enter the string to search for :");
            string strTmp = Console.ReadLine();

            if (objString.StartsWith(strTmp))
                Console.WriteLine("The string '" + objString + "' starts with '" + strTmp + "'.");
            else
                Console.WriteLine("The string '"+objString+"' does not start with '" + strTmp + "'.");

The SubString function retrieves a part of the string from the original string:

  • String.Substring(int i) retrieves the string starting from i (zero based).
  • String.Substring(int i,int j) retrieves the string starting from i and having a length j.

The Split function splits a string delimited with some specified characters. It identifies the substrings that are delimited by one or more characters specified in an array, then returns these substrings in a string array. Delimiter characters are not included in the substrings. The Split function has forms like this:

  • string[] Split(params char[])
  • string[] Split(params char[] separator)

The Split function returns one of these:

  • An array consisting of a single element containing the entire string if the string contains none of the characters in the separator list.
  • An array of substrings if the string is delimited by one or more of the characters specified in the separator list passed in the Split method.
  • An array of substrings in a string delimited by white space characters if those characters occur and the separator array passed is a null reference or contains no delimiter characters.
  • String.Empty (a static read-only field that represents the empty string) where two separator are adjacent or a separator is found at the beginning or end of the string.

For example, if we want to split string 38,\n29, 57 with a character array separator list containing comma and space characters, we will get "38", "", "29", "", "57" as string array elements returned. Or, if we want to split string "38..29..57" with the character array delimiter list containing a period '.' , we will get "38", "", "29", "", "57" as string array elements. 

The Trim function removes white space characters or specified characters from the beginning and end of the string:

  • String.Trim() removes white space characters from the beginning and end of the string.
  • String.Trim(char[] c) removes all occurrences of a set of characters in the array from the beginning and end of the string.

As demonstrated in Listing 20.30, the TrimEnd function removes all occurrences of the set of characters in the array from the end of the string. 

Listing 20.30: String.TrimEnd

            Console.WriteLine("The original string is : " + objString);
            Console.Write("Enter the character array : ");
            char[] c = Console.ReadLine().ToCharArray();
            Console.WriteLine("The modified string is : " + objString.TrimEnd(c));

As demonstrated in Listing 20.31, the TrimStart function removes all occurrences of the set of characters in the array from the beginning of the string. 

Listing 20.31: String.TrimStart

            Console.WriteLine("The original string is : " + objString);
            Console.Write("Enter the character array : ");
            char[] c = Console.ReadLine().ToCharArray();
            Console.WriteLine("The modified string is : " + objString.TrimStart(c));

The IndexOf function returns the index of the first occurrence of a character or string in a given string. The search for the string stops when the required value is found or when the end of the string is reached. The function returns the index if the value is found or -1 if it is not found. The IndexOf function has these forms:

  • IndexOf(char c) returns the occurence c in the string.
  • IndexOf(string str) returns the occurence of str in the string.
  • IndexOf(char c, int i) returns the occurence of c in the string, with the search starting from i.
  • IndexOf(string str, int i) returns the occurence of str in the string, with the search starting from i.
  • IndexOf(char c, int i, int j) returns the occurence of c in the string, with the search starting from i and examining j character positions.
  • IndexOf(string str, int i, int j) returns the occurence of str in the string, with the search starting from i and examining j character positions.

The IndexOfAny function returns the index of the first occurrence of any character of the character array in the given string. The search of the string stops when the required value is found or until the end of the string is reached. It returns the index if the value is found or -1 if it is not found. The IndexOfAny function has these forms:

  • IndexOfAny(char[] c) returns the occurrence of any character of the array in the string.
  • IndexOfAny(char[] c, int i) returns the occurrence of any character of the array in the string, with the search starting from i.
  • IndexOfAny(char[] c, int i, int j) returns the occurrence of any character of the array in the string, with the search starting from i and examining j character positions.

Conclusion

Hope this article would have helped you in understanding the important Member Functions using C#. See other articles on the website on .NET and C#.

visual C-sharp.jpg
The Complete Visual C# Programmer's Guide covers most of the major components that make up C# and the .net environment. The book is geared toward the intermediate programmer, but contains enough material to satisfy the advanced developer.

Up Next
    Ebook Download
    View all
    Learn
    View all